ໂທ​ຫ້ອງ​ການ​: 0086-21-20981107/ 0086-21-68182950

ອີ​ເມວ​: [email protected]

ທຸກຫມວດຫມູ່

ເຄື່ອງມືປະກອບເຄື່ອງຈັກ

ໜ້າ ທຳ ອິດ>ຜະລິດຕະພັນ>ເຄື່ອງມືປະກອບເຄື່ອງຈັກ

True-Rms Ac / Dc Clamp meter Handheld Digital Clamp Meter YT-73091
True-Rms Ac / Dc Clamp meter Handheld Digital Clamp Meter YT-73091
True-Rms Ac / Dc Clamp meter Handheld Digital Clamp Meter YT-73091
True-Rms Ac / Dc Clamp meter Handheld Digital Clamp Meter YT-73091

True-Rms Ac / Dc Clamp meter Handheld Digital Clamp Meter YT-73091


ລາຍລະອຽດ
ສະ​ຖານ​ທີ່​ຕົ້ນ​ກໍາ​ເນີດ: ຈີນ ຊື່ຍີ່ຫໍ້: ຢາໂຕ
ຈໍານວນຮູບແບບ: YT-73091 ປະເພດການສະແດງ: Digital ເທົ່ານັ້ນ
Measuring Current Range: 20​-600 Measuring Voltage Range: 20​-600
Measuring Resistance Range: 20​-200 ອຸນຫະພູມການເຮັດວຽກ: -20 ~ +1000°C / -4 ~ +1832°F
ຂະຫນາດ: 77X230X32MM ນ້ໍາຫນັກ: 220G
ຊື່​ຜະ​ລິດ​ຕະ​ພັນ: DIGITAL CLAMP METER ຄໍາຮ້ອງສະຫມັກ: ການສ້ອມແປງລົດໃຫຍ່
ສີ: ສີແດງແລະສີດໍາ ຂັ້ນຕ່ໍາ: PC 20
ສັນຍາລັກຂອງ: Customized Logo OEM: ຍອມຮັບ
ຄຸນນະພາບ: ທົນທານແຂງ ກຸ່ມ: ອຸດສາຫະ ກຳ
:  
ລາຍ​ລະ​ອຽດ​ຂອງ​ຜະ​ລິດ​ຕະ​ພັນ

 

ລາຍລະອຽດ

The YT-73091 universal meter is equipped with measuring clamps that allow you to measure the intensity of alternating current in a single wire using the induction method. This allows you to measure much higher currents than conventional electric meters of the YT-7308X series (up to 600A). The maximum diameter of the cable tested by the YT-73091 multimeter is 37mm

In addition to measuring the value of alternating current, this device can measure DC voltage, AC voltage, resistance, temperature and check the operation of the diodes.

The buzzer is useful when inspecting electrical installations - it allows us to easily verify circuit continuity. The multimeter's auto-off feature saves battery life. An additional cover protects the multimeter against falls and impacts in transport.

In addition, the YT-73086 digital meter allows temperature measurement, which is especially useful when detecting faulty components of electrical installations (increased resistance of e.g. a damaged wire causes heating of the component).

The "DATA H" button is used to store the measured value on the display. The "MAX H" button is used to keep the highest measured value on the display. Both of these buttons are very useful for highly variable measurements.

The backlit meter screen enables operation in low light conditions.

ການ ນຳ ໃຊ້ / ການ ນຳ ໃຊ້ທີ່ມີຈຸດປະສົງ

For professional measurements of electrical values.

ວິທີການໃຊ້

AC measurement with clamps is as follows: Use the selector to set the appropriate measurement range. Then open the clamp by pressing the lever. A single wire through which alternating current flows (maximum diameter of tested wire is 37 mm) should be placed inside the clamp and closed. The clamp jaws should fit snugly against each other and the wire should be in the central point between the clamps. Otherwise, a measurement error may occur. The measured value can then be read on the display.

ເນື້ອໃນ

Clamp multimeter, test leads 2 sets

ຂໍ້ມູນດ້ານວິຊາການ

ສັນຍາລັກ YT-73091
EAN 5906083730917
ຍີ່ຫໍ້ ໂຍທາ
ນ້ ຳ ໜັກ (ກິໂລ) 0.5750
Master Carton MC 20
Pal 480
ລະດັບອັດຕະໂນມັດ Tak
Sampling frequency 3 ເທື່ອຕໍ່ວິນາທີ
AC voltage measurement 0-600V ± 1,2%
DC voltage measurement 0-600V ± 1,0%
ການວັດແທກຄວາມຕ້ານທານ 0-20 M ±3%
ການວັດແທກອຸນຫະພູມ -20 do 1000°C
ກະແສໄຟຟ້າສະລັບ 0-600A ±3%
Circuit continuity test ກໍ່ສ້າງໃນ buzzer
ທົດສອບ Diode 1mA, 1,48V

 

Application Applications

 

ຫມວດສິນຄ້າ

 

ຜະລິດຕະພັນຂາຍຮ້ອນ

ເຄື່ອງຈັກຍີ່ຫໍ້ YATO

ຄວາມທົນທານ, ຄວາມສົມບູນແບບຂອງວຽກງານ, ວັດສະດຸທີ່ດີເລີດ, ເຫຼັກກ້າທີ່ມີຄຸນນະພາບສູງແມ່ນຄຸນລັກສະນະທາງວິຊາການຂອງຜະລິດຕະພັນ YATO, ເຊິ່ງຂໍ້ສະ ເໜີ ດັ່ງກ່າວມີຄວາມກັງວົນຕໍ່ສາມຂົງເຂດ: ການບໍລິການ, ການກໍ່ສ້າງແລະສວນ. ເຄື່ອງມືແລະເຄື່ອງຈັກທໍ່ YATO ຖືກ ນຳ ໃຊ້ຢ່າງປະສົບຜົນ ສຳ ເລັດໂດຍຜູ້ຊ່ຽວຊານໃນຫຼາຍຂົງເຂດເສດຖະກິດ. ຄວາມທົນທານແລະຄວາມທົນທານທີ່ມີຄວາມໂດດເດັ່ນແມ່ນ YATO ສຳ ລັບການ ນຳ ໃຊ້ໃນສະພາບອຸດສາຫະ ກຳ ແລະການບໍລິການທີ່ຮຸນແຮງ.

 

ການປະຕິບັດ:ຖ້າທ່ານມີ ຄຳ ຖາມໃດໆກ່ຽວກັບສິນຄ້າ, ກະລຸນາຢ່າລັງເລໃຈ ຕິດ​ຕໍ່​ພວກ​ເຮົາ.

ກ່ຽວກັບພວກເຮົາ

ສອບຖາມຂໍ້ມູນ

ປະເພດຮ້ອນ